Email : jagadeeshalkur.nit@navodaya.edu.in
Education:
Ph.D-Pursuing in VTU, Belagavi (Alternative Fuels and IC Engines)
M.Tech in Thermal Power Engg. at PDA College of Engg, Autonomous, Kalaburagi-585102, 2013.
B.E in Mechanical Engineering at JSSATE, Bengaluru-560060, affiliated to VTU, Belagavi, Karnataka, 2011
EXPERIENCE:
Currently working as an Assistant Professor, Department of Mechanical Engineering, Navodaya Institute of Technology Raichur-584103, Karnataka.
Publications:
Papers Published in International Journals:
- Jagadeesh A, Basavaraj M Shrigiri, OD Hebbal-‘Production of Biodiesel using Temple waste oil’. Published in Lecture Notes in Mechanical Engineering, Recent Advances in Hybrid and Electric Automotive Technologies Select Proceedings of HEAT 2021 Springer, ISBN 978-981-19-2091-2-2022.
- Kushal. G. Ambli, B M Dodamani, Jagadeesh A and Dr. Mohan B.V – ‘Heterogeneous Composites for Low and Medium Temperature Thermal Insulation: A Review’. Published a paper in International Journal: Energy and Buildings, ELSEVIER, 12 th July 2019. https://doi.org/10.1016/j.enbuild.2019.07.024
- Mahantesh M. Shivashimpi, S. A. Alur, Jagadeesh A, M.R. Ingalagi, Bhimanagoud M Dodamani-“Effect Of Nozzle Geometry On The Performance And Emission Characteristic Of C I Engine Operated On Palm Oil Methyl Ester” published a paper in International Journal of Prevention and Control of Industrial Pollution, Vol. 4: Issue 2, IJPCIP (2018) 14–21.
- M M Shivashimpi, S A Alur, R S Ellur, Jagadeesh A, M R Ingalagi -Presentated a paper Entitled “Effect Of Nozzle Geometry On The Performance And Emission Characteristic Of C I Engine Operated On Palm Oil Methyl Ester” published a paper in Journal of Emerging Technologies and Innovative Research (JETIR), 2018 JETIR August 2018, Volume 5, Issue 8, ISSN-2349-5162.
- V H Modi, Jagadeesh A “Experimental Investigation of Performance and Emission Characteristics of Di Diesel Engine Operated on WPO, Home and Diesel” in published a paper in International Journal of Science and Technology, Volume 12, Issue 25 (Special Issue) December 2016, ISSN 2230-9559.
- Kushal Ambli, B M Dodamani, Jagadeesh A “Optimization of Material input in Induction furnace for Casting” published a paper in International Journal of Science and Technology, Volume 12, Issue 25 (Special Issue) December 2016, ISSN 2230-9559.
- Jagadeesh A, et.al “EXPERIMENTAL INVESTIGATION OF PERFORMANCE ANALYSIS ON VCR DI DIESEL ENGINE OPERATED ON MULTI BLEND BIODIESEL” in International Journals of Innovative Research in Science and Engineering (IJIRSE), ISSN:2454-9665. Vol-02, Special Issue No-05, May2016.
- Jagadeesh A, et al, “PERFORMANCE ANALYSIS OF VCR DI DIESEL ENGINE OPERATING ON RENEWABLE MULTI FUEL” in International Journals of Innovative Research in Science and Engineering (IJIRSE), ISSN:2454-9665. Vol-02, Special Issue No-05, May-2016.
- Hareesh Naik, Jagadeesh A, B M Dodamani, K G Ambli, “Performance and Emission Characteristics of multi Cylinder DI Diesel Engine Operating on JOME and Diesel”, Published in the International Journal of Advance Research in Science and Engineering(IJARSE), ISSN:2319- 8354, Vol. no.5, Special Issue No. 01, March.
- K M Akkoli, B M Dodamani, Jagadeesh A, Ravi, C “Design and Construction of Food waste Biogas plant for Hostel Mess” Published in International Journal of Scientific Research and Development, ISSN 2321-0613 Vol 3, Issue 3, May 2015.
- B M Dodamani, S B Yapalaparvi, Jagadeesh A “Performance, Emission and Combustion Characteristics of Hydrogen, CNG operated HCCI engines with HnOME Biodiesel” published in the International Journal of Latest technology in engineering, Management and Applied Science, Vol. 3, Sep 2014.
- Jagadeesh A, Prakash S Patil, Om Prakash Hebbal, “Experimental Investigation Of Performance And Combustion Characteristics Of Pongamia Biodiesel And Its Blends On Diesel Engine And LHR Engine” in the year 2013. Published in the International Journal of Engineering Research & Technology (IJERT), ISSN: 2319-1163, Vol. 2 Issue 7, July – 2013, page no 202-206.
Papers Published in International Conferences:
- M M Shivashimpi, S A Alur, R S Ellur, Jagadeesh A, M R Ingalagi- Presentated a paper “Entitled Effect Of Nozzle Geometry On The Performance And Emission Characteristic Of C I Engine Operated On Palm Oil Methyl Ester” published a paper in international conference on recent innovations in science, engineering and technology (ICRISET-18) held during 18th & 19th of May, 2018, at HSIT, Nidasoshi.
- V H Modi, Jagadeesh A “Experimental Investigation of Performance and Emission Characteristics of Di Diesel Engine Operated on WPO, Home and Diesel” Presented in International conference on recent innovations in Engineering ICRIE-2016 held during 8th and 9th October 2016 at HIT, Nidasoshi.
- Kushal Ambli, B M Dodamani, Jagadeesh A Presented a paper entitled “Optimization of Material input in Induction furnace for Casting” published a paper in International conference on recent innovations in Engineering ICRIE-2016 held during 8th and 9th October 2016 at HIT, Nidasoshi.
- Jagadeesh A, et.al “EXPERIMENTAL INVESTIGATION OF PERFORMANCE ANALYSIS ON VCR DI DIESEL ENGINE OPERATED ON MULTI BLEND BIODIESEL Presented in International Journals of Innovative Research in Science and Engineering , International Conference Innovative Science, Engineering and Management (ICITSEM-2016) at ICC, New Delhi, India, ISBN-978-81-932074-9-9 Held on 27-May-2016.
- Jagadeesh A, et al, “PERFORMANCE ANALYSIS OF VCR DI DIESEL ENGINE OPERATING ON RENEWABLE MULTI FUEL” Presented in International Journals of Innovative Research in Science and Engineering , International Conference Innovative Science, Engineering and Management (ICITSEM-2016) at ICC, New Delhi, India, ISBN-978-81-932074-9-9 Held on 27-May-2016.
- Jagadeesh A et.al, “Performance and Emission Characteristics of multi Cylinder DI Diesel Engine Operating on JOME and Diesel” Presented in International Conference On Recent Innovations in Engineering and Management (ICRIEM-2016),at Dhananjay Mahadik Group of Institutions (BIMAT), Kolhapur, Maharashtra, India,: ISBN-978-81932074-5-1, Held on 23-March-2016.
- Papers Presented in National Conferences:
- Jagadeesh A, et.al presented a paper entitled “Plant E-Technology, in National Conference, NCETERM-Delta 2018 held on 26th and 27th October 2018 at GMIT, Davanagere.
- S B Awade, N M Ukkali, Jagadeesh A, B M Dodamani presented a paper entitled “Finite Element analysis of smart composite plates using ANSYS, in 3rd National conference on Advances in Mechanical Engineering” held at K S School of Engineering and Management, Bangalore during 29th April 2016.
- Jagadeesh A et.al, “Performance, Emission Characteristics of Dual Fuel & HCCI Engine Operated on CNG, UOME Biodiesel” Presented in National Conference on “ MAKE IN INDAI-AN OPPORTUNITY FOR ENGINEERING TECHNOLOGIES” at SGBIT, Belagavi.
- Jagadeesh A et.al, “Fuel Saving by Thermic Fluid Boiler” Presented in National Conference on Emerging Trends in Engineering, Technology & Architecture-2016, at DY Patil college of Engineering & Technology, Kolhapur: ISBN, 978-81-920561-8-0,Jan2016.
Projects Executed:
- Grass root project entitled ‘Semi Automated Pesticide Sprayer’ Sponsored with a grant of Rs. 85,000/- from NIAS, Bengaluru for the AY-2020-21
- Project entitled ‘Small Scale Unit to Manufacture Organic Incense (Dhoop)’ selected and exhibited in AICTE-Chhatra Vishwakarma-2019 Awards and appreciated from AICTE Chairman.
- As a Project-Guide for Engineering graduate students received a grant of Rs.4500/- from Karnataka State Council for Science and Technology (KSCST) for the Project proposal entitled “Small Scale Unit to Manufacture Organic Incense (Dhoop)” during 2019-2020.
- As a Project-Guide for Engineering graduate students received a grant of Rs.7000/- from Karnataka State Council for Science and Technology (KSCST) for the Project proposal entitled “Design and Fabrication of Fitness Equipment for Power Generation” during 2018-2019.
- As a Project-Guide for engineering students entitled “Automatic Cloth bag Making Machine” is selected for SMART INDIA HACKTHON-2019 (SIH-19) during AY-2018-19.
- As a Project-Guide for Engineering students entitled “Tree Climbing Cycle” was awarded Consolation Prize in National Level AnveshanA project Exhibition during AY-2017-18.
- As a Project-Guide for engineering students entitled “Multi rotor Wind Mill” was selected for National Level AnveshanA project Exhibition during AY-2016-17.
- As a Project-Guide for engineering students entitled “Smart Jack” is selected for final exhibition in national level KALAM INNOVATIONS held at Chennai A2016-17.
- As a Project-Guide for Engineering students received a grant of Rs.40, 000/- from Vision Group of Science and Technology (VGST) for the Project proposal entitled “Smart Jack” during 2015-2016.
- The project entitled “Fuel saving by utilizing thermic fluid boiler” Project awarded Consolation at SHRISTI-2015 Project exhibition held at, NHCE, and Bangalore.
- As a Project-Guide for Engineering graduate students received a grant of Rs.6000/- from Karnataka State Council for Science and Technology (KSCST) for the Project proposal entitled “Fuel saving by utilizing thermic fluid boiler” during 2014-2015.